Cycle Tube and Puncture Repair: Sizes, Valves and How to Fix a Flat
Match a cycle tube to your tyre size printed on the sidewall (for example 26 × 1.95–2.125) and your valve type. To fix a puncture: remove the wheel, lever off one side of the tyre, find the hole by pumping and listening (or using water), roughen, glue and patch it, check the tyre for the thorn or glass, then refit and pump. Thicker or puncture-resistant tyres and sealant reduce flats.

- Match size on tyre sidewall
- Match valve type
- Patch: roughen, glue, press
- Remove the thorn from the tyre
Punctures are part of cycling — especially on roads with glass, thorns and broken edges. The good news: fixing one takes about 15 minutes once you've done it a couple of times.
Choosing the right tube
The tyre sidewall shows its size, for example 26 × 1.95 (mountain), 700 × 35c (hybrid) or 20 × 2.125 (kids/BMX). Buy a tube that covers that size range, with the same valve type as your rim hole — see the air pump guide for Schrader, Presta and Dunlop valves.
How to fix a puncture
- Remove the wheel. Open the quick release or loosen the axle nuts; on the rear, shift to the smallest gear first.
- Deflate fully and push the tyre bead into the centre of the rim to create slack.
- Lever one side off with two tyre levers, then pull out the tube.
- Find the hole: pump some air and listen, or pass the tube through a bowl of water and watch for bubbles.
- Prepare: roughen the area with sandpaper, apply a thin layer of glue, wait until tacky (a minute or two).
- Patch: press the patch on firmly for a minute.
- Find the cause: run your fingers carefully inside the tyre and check the rim tape. Remove any thorn or glass — otherwise you'll puncture again immediately.
- Refit: put a little air in the tube, tuck it into the tyre, push the bead back on by hand, pump to the correct pressure and refit the wheel.
Preventing punctures
Keep tyres at the right pressure (low pressure causes "pinch flats" on speed breakers). Replace worn tyres with puncture-resistant ones, which have a protective belt under the tread. Avoid riding along the road edge where glass collects. Tube sealant or tubeless tyres help on thorny routes.
Your puncture kit
Carry two tyre levers, a patch kit (patches, glue, sandpaper), a spare tube and a mini pump. On longer rides, a spare tube is quicker than patching at the roadside — patch the old one at home. More kit in cycle accessories and maintenance tips in maintenance basics.
Frequently asked questions
How do I know my cycle tube size?
Read the tyre sidewall — for example 26 × 1.95 or 700 × 35c. Buy a tube whose range includes that size, with the right valve type.
Can I fix a puncture without removing the wheel?
Sometimes: lever off one side of the tyre, pull out the section of tube with the hole and patch it. It's easier with the wheel off.
Are tubeless tyres worth it?
For mountain and gravel bikes they reduce flats and allow lower pressures. They need compatible rims and sealant top-ups.
Why do I keep getting punctures?
Usually low pressure (pinch flats), a thorn still stuck in the tyre, a worn tyre, or a sharp spoke end under a damaged rim tape.
Tell us the rider's height, age and budget — we'll recommend a bike, whether or not we stock it.
Related guides
Parts & accessoriesAir Pump for Cycle: Types, Valves and How to Pump a Cycle TyreChoosing an air pump for a cycle (floor, mini, CO2, electric), Presta vs Schrader vs Dunlop valves, correct tyre pressure, and how to pump air into a cycle.Read guide →
Buying guidesCycle Accessories: What You Actually Need (and What Can Wait)The cycle accessories worth buying first in Pakistan — helmet, lights, lock, pump, bell — plus useful extras for commuting, kids, fitness and e-cycles.Read guide →